The Rock Krawler JK 4.5 inch X-Factor Long Arm Stretch System is the best performing trail suspension for JK owners looking to run 37 inch, 38 inch or 40 inch tall tires with flat fenders. This system features the Rock Krawler Independent Three Link Conversion. The Independent Three Link's 100 percent bind free design has proven its self to be the best choice for those looking for maximum articulation while maintaining a factory like highway ride and tight handling.
This system features the best in class cross over angles and ground clearance.
The rear suspension features adjustable anti-squat so you can dial in your JK's suspension to your liking. All of the high clearance lower control arms are made from 2 inch solid alloy steel and built for abuse. The JK X-Factor Stretch Systems re positions the rear axle back 3 inch to yield a perfect 99 inch wheelbase. The 99 inch wheelbase is a great compromise for those looking to gain a little wheelbase for improved climbing ability, but not loose too much cross over ability while maintaining the vehicle 50 states street legal. This system comes with our exclusive Abuse Proof Lifetime Warranty on all hard parts!
- Excellent Highway Ride and Handling
- Unbelievable Off-Road Ability
- Independent 3 Link Conversion (100 percent Bind Free Suspension)
- Best in Class Ground Clearance and Cross Over Angles
- Adjustable Rear Anti-Squat
- Fully Adjustable Components
- High Steer Upgrade with Off-Road Pro Drag Link
- Long Travel Functional Multi Rate Coil Springs
- Re positions the Rear Axle Back 3 inch For a Perfect 99 inch Wheelbase
- Up to 40 inch Tires (Flat Fenders)
- Abuse Proof Lifetime Warranty on All Hard Parts
- Upgradeable to any other Rock Krawler System
(4) Long travel functional multi rate coil springs
(4) High clearance-adjustable lower control arms made of 2.0 inch solid alloy steel
(2) Double adjustable track bars made from 1.5 inch solid alloy steel
(4) Long arm mounts and cross member made from 1/4 inch thick laser cut steel
(2) High misalignment adjustable upper control arms made from 1.625 inch solid alloy steel
(1) Rear independent 3rd link mount made of 1/4 inch thick laser cut steel
(1) Weld on rear axle truss with adjustable anti-squat
(2) Rear track bar relocation bracket made from thick laser cut steel
(2) Weld on offset rear axle spring pads
(1) Front track bar relocation bracket made from thick laser cut steel
(1) Off-Road pro drag link
(1) Adjustable front sway bar disconnects
(2) Rear extended sway bar links
(4) Long travel stainless steel brakes
(2) Rear coil spring degree wedges
(2) Front spring retainer clips, hardware and detailed instructions
- The X Factor Stretch System is designed for flat fender and stretch rear corner use. This will require body work.
- Welding of the Rear Cradle, Rear Third Link Mount, Long Arm Mounts is required.
- Removal of the OEM lower control arm mounts is required.
- Removal of the front upper control arm mount on the driver side is required.
- Minor exhaust rerouting required before the collector on the driver's side. This is recommended to be done prior to the suspension system being installed.
- Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up.
- We typically recommend 3.5 inch of back spacing on rims for 38 inch/40 inch tall tires.